2.2 Inch with 300 CD/M2 Brightness for Industrial Applications LCD Display

Product Description

2.2 Inch TFT LCD Screen with SPI Interface and 300 Cd/m2 Brightness for Industrial Applications
This 2.2-inch diagonal full color QCIF 170x220 TFT LCD display is easily controlled by MCU and designed for embedded systems, industrial devices, security equipment, and hand-held applications requiring high-quality colorful imaging.
 

Product Specifications:

Product:	2.2 Inch TFT Screen	Resolution:	176x220
Touch Screen:	Without Touch Screen	Interface:	SPI
Cover Glass:	To Be Customized	Viewing Direction:	12:00
Driver IC:	ILI9225G Or Equivalent	Connection:	Plugging (customizable)
Surface Luminance:	300 Cd/m²(nits)	Pin Number:	14 Pins

 

Technical Parameters:

• Size: Module dimensions approximately 41.7×56.16×3.35mm with effective display area of 43.56x34.85mm
• Resolution: 176×220 pixels (QCIF level)
• Interface: Supports 3-wire SPI and RGB interfaces for easy microcontroller connection
• Touchscreen: Available with resistive touchscreen or without touchscreen option
• Viewing Angle: 12 o'clock direction with gray-scale inversion at 6 o'clock
• Brightness: Typical brightness value of 200cd/m²
• Operating Temperature: -20ºC to +70ºC operating range, -30ºC to +80ºC storage range

 

Chip Characteristics:

• Color Display: ILI9225G chip supports 262,144 color display with γ correction function
• Function Integration: Integrates 528 channel source drivers and 220 channel gate drivers with 87,120 bytes of graphic RAM
• Power Management: Supports low-power operation with logic power supply voltage range of 1.6V to 3.3V
• SPI Interface: Requires minimal signal lines (SCK, MOSI, CS, RS, RST) reducing pin occupation
• High Compatibility: Built-in power management and level conversion circuit supports 3.3V or 5V logic levels

 

Applications:

• Embedded Systems: Ideal for portable devices requiring graphical human-computer interaction interfaces
• Industrial Control: Used in control panels to display device status and operation instructions
• Smart Home: Serves as display interface for smart home terminals and control menus
• Teaching Experiments: Commonly used in university electronic information courses for hardware driver learning
• Medical Instruments: Applied to small medical devices like blood glucose meters and blood pressure monitors
• Consumer Electronics: Used in handheld game consoles, MP4 players, and electronic dictionaries

 

Detailed Photos

 

 

 

Our Advantages

Our Advantage:

 

Rich experience	Good knowledge of the displays market to put together solutions that add value and provide a unique proposition for the client
Advanced Equipment	Full automatic FPC&IC bonding machine, film attaching machine, CNC machine, polish machine advance production equipment ensure product quality
Quality Assurance	Advance inspection instrument and equipment to ensure 100% inspection for each and every piece before shipment
Fast response	Quickly realize your customized ideas, and have a sample ready in short time
Low MOQ	Depends on product
Stable supply	1~10 years supply period
Extensive range	Providing complete solution from Mono to Color LCD module, Optical bonding between display to cover glass as well as cover glass to touch screen
Large production capacity	Operation capacity 2KK monthly
Quality guarantee	RoHS compliant
Management	ISO 9001:2008, ISO 14001:2004

Company Profile

Product Line:

☆ Clean Room class [email protected], Pressurec 0.8kgf

☆ Antistatic floor, resistance : 1x10 ohm to 1x10 ohm

☆ COG production lines: 4 .

☆ Backlight production lines: 2 .

☆ Existing machine capacity will be 1KK per month.

Major customers:



 

Packaging & Shipping

Packaging & Shipping:

 
       Packaging: Carton boxess, Cupboard , EPE, Blister Tray, About the package way, it is up to the size of products,
                           according to customer request and demand. Different countries have not same requirement..

Shipping: Expr ess way as DHL,Fedex,EMS,UPS,air shipping,sea shipping,Any shipping method you prefer.
  

Payment Method:

 

FAQ

FAQ:

1. I want the LCD display 8 digits and the outline size is 65x30x2.8mm...…?
   Answer: No problem. Firstly, please kindly send us your specification/ drawing paper 
   If you have not the specification, you can also provide your samples; we will recommend the suitable one

 if it is standard products. Or we can customize for you based on your own requirement.

2.This LCD  is just what we want, but it is big size, do you have any smaller size? And the display content need to be changed a little.
      Answer: For the segment type LCD module, if you need modify the outline size or display content,
a new LCD glass module is need. We have to open new tooling for you.

3. This LCD display is HTN type, but I want STN type,can you make?
      Answer: That's all right .  we can change for you as per you request.

4. I want customize a new LCD module. Can you do?
      Answer: Yes, we can. Please send your drawing paper. If you have not, please advise me the outline size 
of the LCD display, display information( Glass thickness, Polarizer, Display Type, Connector mode,
Storage Temp. Operating Temp.  Supply Voltage, Viewing direction, drive condition), we can customize for you.

5. What is leading time for tooling?
      Answer: General speaking, it will cost 15 to 25 days  after drawing paper confirmation and tooling charge payment,
we can report you the exact time when you confirm the drawing paper.

6. Can you send us samples for checking?
     Answer: Yes,. Samples order is available.

7. What is the Leading Time?
    Answer: If we have stock for the standard ones, the leading time is one day after payment. If it is the mass production for 
special ones, the leading time is about 15-30 days. suppose we can finish earlier,  we will report the information in advanced.
 

After Sales Service

 

Our Services:
1. Free repair within one year after the shipment of products from us.
2. Replacement within 30 days after the shipment of products from us due to products' problems.
3. We can print your logo and stick your model No.on the cameras.
4. We have long cooperation with many shipping companies and our export volume is large. The shipping companies 
can offer us good discounts.
5. Professional technician supports. We have a good after-sales service team. They can solve your problems in time.
6.All goods will be inspected and tested by our engineers and QC/QA before packing and shipment.
7.Customers satisfactory is most important to us.If you have any problem or questions regarding our transaction.Please contact us by Email or online. It will be responded within 24 hours.
8.Products pictures only for your reference. please kindly refer to the specification. we can provide the products basic on the specification. or you can offer your own specification or drawing , we can customize all kinds of LCD displays for you. thanks for your kind support always.