| Customization: | Available |
|---|---|
| Type: | Large range Ultrasonic Sensor |
| Output Signal Type: | Analog Type |
|
Still deciding? Get samples of US$ 0.2/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
|
ITEM |
TEST CONDITION AND REQUIREMENT |
|
1 |
High Temperature |
After being placed in a chamber with 802ºC for 96 hours and then being placed in normal condition for 2 hours. |
|
2 |
Low Temperature |
After being Placed in a chamber with -302ºC for 96 hours and then being placed in normal condition for 2 hours. |
|
3 |
Humidity Test |
After being Placed in a chamber with 90-95% R.H. at 402ºC for 96 hours and then being placed in normal condition for 2 hours. |
|
4 |
Temperature Cycle |
The part shall be subjected to 5 cycles. One cycle shall be consist of: |
|
5 |
Drop Test |
Drop on a hard wood board of 4cm thick, any directions ,6 times, at the height of 75cm . |
|
6 |
Vibration Test |
After being applied vibration of amplitude of 1.5mm with 10 to 55 Hz band of vibration frequency to each of 3 perpendicular directions for 2 hours . |
|
7 |
Solderability |
Lead terminals are immersed in rosin for 5 seconds and then immersed in solder bath of +3005ºC for 31 seconds . |
|
8 |
Terminal Strength |
The force of 9.8N(1.0kg) is applied to each terminal in axial direction for 10 seconds. |
TEST CONDITION.
Standard Test Condition : a) Temperature :+5 ~ +35ºC b) Humidity :45-85% c) Pressure :860-1060mbar
Judgment Test Condition : a) Temperature :+25 ±2ºC b) Humidity :60-70% c) Pressure :860-1060mbar
){kind=link}