3.6 Inch 1000 CD/M² Brightness Round TFT LCD Display with Touch Screen

Product Description

3.6 Inch 1000 cd/m² Brightness Round TFT LCD Display with Touch Screen

 

Product Description

• Product Name: Round TFT LCD
• Mechanical Outline Size (W*H*T): 107.23*107.23*9.73
• Size: 3.6 inches
• IC/LCM Driver IC: ST72566
• Lumens degrees: 1000cd/m²
• Pixel Pitch (W*H): 0.165*0.165
• Round Liquid Crystal Display
• Round TFT LCD
• Circular TFT LCD
• High Brightness
• Circular touch screen

 

Technical Parameters
 

Property	Value
Product Name	Circular TFT LCD
Product Type	Round TFT Liquid Crystal Display
Drive Element	TFT Active Matrix
Size	3.6 Inches
Active Area	83.49mm x 89.76mm
Operating Temperature	-20°C to +70°C
Number of Pixels	544 x 506
Viewing Direction	ALL O'CLOCK
Pixel Arrangement	RGB Stripe
Mechanical Outline Size (W x H x T)	107.23mm x 107.23mm x 9.73mm
Pixel Pitch (W x H)	0.165mm x 0.165mm

 

The resolution is 544*506, using IPS full-view high-definition bright display technology. The operating temperature range is -30ºC to 85ºC. The interface is RGB 24-bit. It is mainly applied in two-wheel vehicle instruments, industrial instrument displays, medical equipment, etc.

This type of display is mostly of industrial-grade capacitive/resistive touch type. For resistive touch, a dedicated touch pen (with a pen tip diameter of ≥ 1mm) must be used. Avoid using sharp objects (such as screwdrivers, fingernails) to directly click on it to prevent scratching the touch panel coating.

For capacitive touch screens, it is necessary to keep the screen surface clean. If there is any oil or dust, use a dust-free cloth dipped in industrial alcohol (with a concentration of 75% to 95%) to gently wipe it. Avoid using wet cloths or corrosive liquids (such as gasoline) for cleaning to prevent damage to the touch circuit.

The touch response has a certain delay (typically ≤ 100ms). Avoid rapid and consecutive clicks to prevent the accumulation of instructions, which could cause disorder in the instrument operation.

Company Profile

Product Line:

☆ Clean Room class [email protected], Pressurec 0.8kgf

☆ Antistatic floor, resistance : 1x10 ohm to 1x10 ohm

☆ COG production lines: 4 .

☆ Backlight production lines: 2 .

☆ Existing machine capacity will be 1KK per month.

 

**In compliance with ISO9001: 2008 Quality Management
***One year's guarantee for unartificial damage

1: Small lcd display screen
2: Reasonable price
3: Large capacity
4: Certificate ISO; Rohs, REACH
5: Dimension as customer request
6: STN blue small lcd display screen
 

******************************************************************************************************************************************************

Packaging & Shipping

Packaging & Shipping:

 
Packaging: Carton boxess, Cupboard , EPE, Blister Tray, About the package way, it is up to the size of products,
according to customer request and demand. Different countries have not same requirement..




Shipping: Express way as DHL,Fedex,EMS,UPS,air shipping,sea shipping,Any shipping method you prefer.
 

 

  
Payment Method:


 

FAQ

FAQ:

1. I want the LCD display 8 digits and the outline size is 65x30x2.8mm...…?
   Answer: No problem. Firstly, please kindly send us your specification/ drawing paper 
   If you have not the specification, you can also provide your samples; we will recommend the suitable one

 if it is standard products. Or we can customize for you based on your own requirement.

2.This LCD  is just what we want, but it is big size, do you have any smaller size? And the display content need to be changed a little.
      Answer: For the segment type LCD module, if you need modify the outline size or display content, 
a new LCD glass module is need. We have to open new tooling for you.

3. This LCD display is HTN type, but I want STN type,can you make?
      Answer: That's all right .  we can change for you as per you request.

4. I want customize a new LCD module. Can you do?
      Answer: Yes, we can. Please send your drawing paper. If you have not, please advise me the outline size 
of the LCD display, display information( Glass thickness, Polarizer, Display Type, Connector mode,
Storage Temp. Operating Temp.  Supply Voltage, Viewing direction, drive condition), we can customize for you. 

5. What is leading time for tooling?
      Answer: General speaking, it will cost 15 to 25 days  after drawing paper confirmation and tooling charge payment, 
we can report you the exact time when you confirm the drawing paper.

6. Can you send us samples for checking?
     Answer: Yes,. Samples order is available.

7. What is the Leading Time?
    Answer: If we have stock for the standard ones, the leading time is one day after payment. If it is the mass production for 
special ones, the leading time is about 15-30 days. suppose we can finish earlier,  we will report the information in advanced.
 

After Sales Service

Our Services:
1. Free repair within one year after the shipment of products from us.
2. Replacement within 30 days after the shipment of products from us due to products' problems.
3. We can print your logo and stick your model No.on the cameras.
4. We have long cooperation with many shipping companies and our export volume is large. The shipping companies 
can offer us good discounts.
5. Professional technician supports. We have a good after-sales service team. They can solve your problems in time.
6.All goods will be inspected and tested by our engineers and QC/QA before packing and shipment.
7.Customers satisfactory is most important to us.If you have any problem or questions regarding our transaction.Please contact us by Email or online. It will be responded within 24 hours.
8.Products pictures only for your reference. please kindly refer to the specification. we can provide the products basic on the specification. or you can offer your own specification or drawing , we can customize all kinds of LCD displays for you. thanks for your kind support always.